Carli Suspension 2014-2025 Ram 2500 Dominator System 3.25" Lift
Carli Suspension 2014-2025 Ram 2500 Dominator System 3.25" Lift
The Carli Dominator system is hands down the King of all Ram suspension systems. It builds off the same base setup as the other options in the Carli 3.25," but adds 3.0" diameter King shocks that are tuned and proprietary to Carli Suspension. Unlike other setups, the Carli Dominator system uses 3.0 shocks front and rear with the help of fabricated shock mounts that not only support the massive forces that can happen with this system, but allow for full suspension articulation without contact between the shocks and frame.
Because of the massive piston and shim stack surface area in these shocks, Carli was able to achieve an incredible balance of on road comfort and off road capability. This setup offers the softest on road ride of any Carli system, yet is just as capable of getting airborne or hitting whoops at 60 miles an hour. In fact, this system is so capable that Carli recommends paring it with a weld on front axle truss to prevent your axle from bending with large impacts or bottom outs.
Carli offers two mandatory option selections for the rear of the truck. The first is coils. Select the R2 high capacity coils if you have 500-800 pounds of constant payload, and the R1 coils if you have an empty truck with variable load like towing.
Carli also offers two rear track bar options. Select the track bar drop to net a lower total cost, or the Carli full replacement rear track bar system upgrade to have the best handling and eliminate the rear "wag" these trucks can exhibit. Carli highly recommend the full rear track bar if you need R2 high capacity coils or tow regularly.
The Factory Power Wagon Sway Bar Disconnect and sway bar are retained with this system and functions just like factory!
This system can be further upgraded with the addition of Carli's steering stabilizer options, and fabricated radius arms for the most performance and ride quality.
This system has unique wheel requirements as the rear shocks sit outboard on the frame, and the wheels need to clear that. Carli recommends a 0 offset wheel that's 8.5-9" wide and that can be paired with a 35, 37, or 38" tire.
- Carli Tuned King 3.0″ Remote Reservoir Shock Package with Stainless Shafts, Reservoir Mounts, Brake Line Kit, Coil Isolator Supports, Front Lower Shock Mounts, Rear Upper and Lower Shocks Mounts, Bed Supports and E-Brake Relocation Bracket
- Rear Sway Bar End Links
- Front Bump Drops
- Front Linear-Rate Coil Springs
- Rear Multi-Rate Coil Springs, R2
- Adjustable Track Bar with Stabilizer Bracket
- Radius Arm Drops
- Transmission Crossmember, Extended Hardware Kit
- Rear Bump Drops
Original: $9,950.41
-65%$9,950.41
$3,482.64Carli Suspension 2014-2025 Ram 2500 Dominator System 3.25" Lift
Carli Suspension 2014-2025 Ram 2500 Dominator System 3.25" Lift
The Carli Dominator system is hands down the King of all Ram suspension systems. It builds off the same base setup as the other options in the Carli 3.25," but adds 3.0" diameter King shocks that are tuned and proprietary to Carli Suspension. Unlike other setups, the Carli Dominator system uses 3.0 shocks front and rear with the help of fabricated shock mounts that not only support the massive forces that can happen with this system, but allow for full suspension articulation without contact between the shocks and frame.
Because of the massive piston and shim stack surface area in these shocks, Carli was able to achieve an incredible balance of on road comfort and off road capability. This setup offers the softest on road ride of any Carli system, yet is just as capable of getting airborne or hitting whoops at 60 miles an hour. In fact, this system is so capable that Carli recommends paring it with a weld on front axle truss to prevent your axle from bending with large impacts or bottom outs.
Carli offers two mandatory option selections for the rear of the truck. The first is coils. Select the R2 high capacity coils if you have 500-800 pounds of constant payload, and the R1 coils if you have an empty truck with variable load like towing.
Carli also offers two rear track bar options. Select the track bar drop to net a lower total cost, or the Carli full replacement rear track bar system upgrade to have the best handling and eliminate the rear "wag" these trucks can exhibit. Carli highly recommend the full rear track bar if you need R2 high capacity coils or tow regularly.
The Factory Power Wagon Sway Bar Disconnect and sway bar are retained with this system and functions just like factory!
This system can be further upgraded with the addition of Carli's steering stabilizer options, and fabricated radius arms for the most performance and ride quality.
This system has unique wheel requirements as the rear shocks sit outboard on the frame, and the wheels need to clear that. Carli recommends a 0 offset wheel that's 8.5-9" wide and that can be paired with a 35, 37, or 38" tire.
- Carli Tuned King 3.0″ Remote Reservoir Shock Package with Stainless Shafts, Reservoir Mounts, Brake Line Kit, Coil Isolator Supports, Front Lower Shock Mounts, Rear Upper and Lower Shocks Mounts, Bed Supports and E-Brake Relocation Bracket
- Rear Sway Bar End Links
- Front Bump Drops
- Front Linear-Rate Coil Springs
- Rear Multi-Rate Coil Springs, R2
- Adjustable Track Bar with Stabilizer Bracket
- Radius Arm Drops
- Transmission Crossmember, Extended Hardware Kit
- Rear Bump Drops
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Carli Suspension 2014-2025 Ram 2500 Dominator System 3.25" Lift
The Carli Dominator system is hands down the King of all Ram suspension systems. It builds off the same base setup as the other options in the Carli 3.25," but adds 3.0" diameter King shocks that are tuned and proprietary to Carli Suspension. Unlike other setups, the Carli Dominator system uses 3.0 shocks front and rear with the help of fabricated shock mounts that not only support the massive forces that can happen with this system, but allow for full suspension articulation without contact between the shocks and frame.
Because of the massive piston and shim stack surface area in these shocks, Carli was able to achieve an incredible balance of on road comfort and off road capability. This setup offers the softest on road ride of any Carli system, yet is just as capable of getting airborne or hitting whoops at 60 miles an hour. In fact, this system is so capable that Carli recommends paring it with a weld on front axle truss to prevent your axle from bending with large impacts or bottom outs.
Carli offers two mandatory option selections for the rear of the truck. The first is coils. Select the R2 high capacity coils if you have 500-800 pounds of constant payload, and the R1 coils if you have an empty truck with variable load like towing.
Carli also offers two rear track bar options. Select the track bar drop to net a lower total cost, or the Carli full replacement rear track bar system upgrade to have the best handling and eliminate the rear "wag" these trucks can exhibit. Carli highly recommend the full rear track bar if you need R2 high capacity coils or tow regularly.
The Factory Power Wagon Sway Bar Disconnect and sway bar are retained with this system and functions just like factory!
This system can be further upgraded with the addition of Carli's steering stabilizer options, and fabricated radius arms for the most performance and ride quality.
This system has unique wheel requirements as the rear shocks sit outboard on the frame, and the wheels need to clear that. Carli recommends a 0 offset wheel that's 8.5-9" wide and that can be paired with a 35, 37, or 38" tire.
- Carli Tuned King 3.0″ Remote Reservoir Shock Package with Stainless Shafts, Reservoir Mounts, Brake Line Kit, Coil Isolator Supports, Front Lower Shock Mounts, Rear Upper and Lower Shocks Mounts, Bed Supports and E-Brake Relocation Bracket
- Rear Sway Bar End Links
- Front Bump Drops
- Front Linear-Rate Coil Springs
- Rear Multi-Rate Coil Springs, R2
- Adjustable Track Bar with Stabilizer Bracket
- Radius Arm Drops
- Transmission Crossmember, Extended Hardware Kit
- Rear Bump Drops
