MORRFlate Ten Six PSI Pro 12v Portable Compressor - Gen 2
MORRFlate Ten Six PSI Pro 12v Portable Compressor - Gen 2
This is the same great platform as the regular TenSix compressors, but now with added PSI Proā¢ Technology, and now with the latest āGen2ā upgrades! User friendly, automatic, easy, and still blazing fast. Simply use the + and ā buttons to set your desired pressure on the control board, then hit Go! The compressor will do its thing while you sit back, relax, check bolts, make a road soda, or just hang with your buddies. Let your TenSix PSI Proā¢ figure everything out and do all the work. For reference, the TenSix PSI Proā¢, combined with aĀ MORRFlate Quad Hose Kit, will fill a set of 35ā³ tires from 10 psi to 40 psi in about 5 minutesā¦ without you doing anything! Twice as fast as Smittybilt 2781s, and 58% faster than a Twin ARB! The big story that makes the TenSixā¢ shine, is what happens when you combine it with a MORRFlate 4 Tire Kit!
- Air up a set of 35ā³ tires from 10 to 40 psi in under 5min (when combined with aĀ 4 Tire Hose Kit)
- 10.6 CFM dual cylinder compressor at 0 PSI
- 6.5 CFM at 30 psi
- 10-120 psi in Auto Mode
- 1-150 psi in Manual Mode
- Thermal Cutoff Switch & Purge Valve
- 80% duty cycle @ 0psi (45min on, 10min off) (6-8 vehicles) (see duty cycle chart)
- 12v, 90amps peak, ~50amp running
- 14x7x9ā³ external dimensions
- 70-75 dB noise level from 1ft distance
- Beefed up carrying bag with accessory pockets
- Threaded filter caps so the compressor can be mounted in any direction/orientation (except upside down)
- USA Standard color matched air fitting ā Push-to-connect āUniversalā Coupler (Works with 1/4ā³ Industrial, Auto, or Aro fittings)
- WARNING: Compressors get hot! Recommended to wear gloves when disconnecting air fittings.
- Since the TenSixā¢ is rated for 10.6 CFM, it is highly recommended to use with aĀ MORRFlate 4 Tire Inflation & Deflationā¢ KitĀ to avoid back pressures on the compressor from filling 1 tire at a time.
The PSI Pro compressor can still operate like the regular TenSix by utilizing the "Tank Mode" on it. This compressor is not designed for 1 tire at a time. You can still air up a single flat if you need to, but the duty cycle dwindles to 8-10min doing 1 tire at a time. Airing up an entire vehicle, 1 tire at a time, will damage the TenSix. It just simply puts out too much air and is optimized for 4 tires at a time.
Gen2 Upgrades (Also, now unique to only MORRFlate):
- Stainless Steel Outlet Hose (for better heat dissipation and heat sinking)
- Purge Valve (to release the internal pressures when done)
- Resized Aluminum heat sinks (upgraded from ABS so they actually fit the cylinders and works as a heat sink)
- Internal aluminum cylinders (upgraded from mild steel to dissipate heat better)
- New piston rings (better material for wear and heat resistance longevity)
KRAVE is the Canadian Dealer & Distributor for all MORRFlate products.
Original: $348.17
-65%$348.17
$121.86More Images
MORRFlate Ten Six PSI Pro 12v Portable Compressor - Gen 2
MORRFlate Ten Six PSI Pro 12v Portable Compressor - Gen 2
This is the same great platform as the regular TenSix compressors, but now with added PSI Proā¢ Technology, and now with the latest āGen2ā upgrades! User friendly, automatic, easy, and still blazing fast. Simply use the + and ā buttons to set your desired pressure on the control board, then hit Go! The compressor will do its thing while you sit back, relax, check bolts, make a road soda, or just hang with your buddies. Let your TenSix PSI Proā¢ figure everything out and do all the work. For reference, the TenSix PSI Proā¢, combined with aĀ MORRFlate Quad Hose Kit, will fill a set of 35ā³ tires from 10 psi to 40 psi in about 5 minutesā¦ without you doing anything! Twice as fast as Smittybilt 2781s, and 58% faster than a Twin ARB! The big story that makes the TenSixā¢ shine, is what happens when you combine it with a MORRFlate 4 Tire Kit!
- Air up a set of 35ā³ tires from 10 to 40 psi in under 5min (when combined with aĀ 4 Tire Hose Kit)
- 10.6 CFM dual cylinder compressor at 0 PSI
- 6.5 CFM at 30 psi
- 10-120 psi in Auto Mode
- 1-150 psi in Manual Mode
- Thermal Cutoff Switch & Purge Valve
- 80% duty cycle @ 0psi (45min on, 10min off) (6-8 vehicles) (see duty cycle chart)
- 12v, 90amps peak, ~50amp running
- 14x7x9ā³ external dimensions
- 70-75 dB noise level from 1ft distance
- Beefed up carrying bag with accessory pockets
- Threaded filter caps so the compressor can be mounted in any direction/orientation (except upside down)
- USA Standard color matched air fitting ā Push-to-connect āUniversalā Coupler (Works with 1/4ā³ Industrial, Auto, or Aro fittings)
- WARNING: Compressors get hot! Recommended to wear gloves when disconnecting air fittings.
- Since the TenSixā¢ is rated for 10.6 CFM, it is highly recommended to use with aĀ MORRFlate 4 Tire Inflation & Deflationā¢ KitĀ to avoid back pressures on the compressor from filling 1 tire at a time.
The PSI Pro compressor can still operate like the regular TenSix by utilizing the "Tank Mode" on it. This compressor is not designed for 1 tire at a time. You can still air up a single flat if you need to, but the duty cycle dwindles to 8-10min doing 1 tire at a time. Airing up an entire vehicle, 1 tire at a time, will damage the TenSix. It just simply puts out too much air and is optimized for 4 tires at a time.
Gen2 Upgrades (Also, now unique to only MORRFlate):
- Stainless Steel Outlet Hose (for better heat dissipation and heat sinking)
- Purge Valve (to release the internal pressures when done)
- Resized Aluminum heat sinks (upgraded from ABS so they actually fit the cylinders and works as a heat sink)
- Internal aluminum cylinders (upgraded from mild steel to dissipate heat better)
- New piston rings (better material for wear and heat resistance longevity)
KRAVE is the Canadian Dealer & Distributor for all MORRFlate products.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
MORRFlate Ten Six PSI Pro 12v Portable Compressor - Gen 2
This is the same great platform as the regular TenSix compressors, but now with added PSI Proā¢ Technology, and now with the latest āGen2ā upgrades! User friendly, automatic, easy, and still blazing fast. Simply use the + and ā buttons to set your desired pressure on the control board, then hit Go! The compressor will do its thing while you sit back, relax, check bolts, make a road soda, or just hang with your buddies. Let your TenSix PSI Proā¢ figure everything out and do all the work. For reference, the TenSix PSI Proā¢, combined with aĀ MORRFlate Quad Hose Kit, will fill a set of 35ā³ tires from 10 psi to 40 psi in about 5 minutesā¦ without you doing anything! Twice as fast as Smittybilt 2781s, and 58% faster than a Twin ARB! The big story that makes the TenSixā¢ shine, is what happens when you combine it with a MORRFlate 4 Tire Kit!
- Air up a set of 35ā³ tires from 10 to 40 psi in under 5min (when combined with aĀ 4 Tire Hose Kit)
- 10.6 CFM dual cylinder compressor at 0 PSI
- 6.5 CFM at 30 psi
- 10-120 psi in Auto Mode
- 1-150 psi in Manual Mode
- Thermal Cutoff Switch & Purge Valve
- 80% duty cycle @ 0psi (45min on, 10min off) (6-8 vehicles) (see duty cycle chart)
- 12v, 90amps peak, ~50amp running
- 14x7x9ā³ external dimensions
- 70-75 dB noise level from 1ft distance
- Beefed up carrying bag with accessory pockets
- Threaded filter caps so the compressor can be mounted in any direction/orientation (except upside down)
- USA Standard color matched air fitting ā Push-to-connect āUniversalā Coupler (Works with 1/4ā³ Industrial, Auto, or Aro fittings)
- WARNING: Compressors get hot! Recommended to wear gloves when disconnecting air fittings.
- Since the TenSixā¢ is rated for 10.6 CFM, it is highly recommended to use with aĀ MORRFlate 4 Tire Inflation & Deflationā¢ KitĀ to avoid back pressures on the compressor from filling 1 tire at a time.
The PSI Pro compressor can still operate like the regular TenSix by utilizing the "Tank Mode" on it. This compressor is not designed for 1 tire at a time. You can still air up a single flat if you need to, but the duty cycle dwindles to 8-10min doing 1 tire at a time. Airing up an entire vehicle, 1 tire at a time, will damage the TenSix. It just simply puts out too much air and is optimized for 4 tires at a time.
Gen2 Upgrades (Also, now unique to only MORRFlate):
- Stainless Steel Outlet Hose (for better heat dissipation and heat sinking)
- Purge Valve (to release the internal pressures when done)
- Resized Aluminum heat sinks (upgraded from ABS so they actually fit the cylinders and works as a heat sink)
- Internal aluminum cylinders (upgraded from mild steel to dissipate heat better)
- New piston rings (better material for wear and heat resistance longevity)
